Universal Remote Control Atlas M1055 Manual de usuario descargar pdf (Pagina 13)

• Learned keys are mode-specific, so each one can

store a unique function for each mode.

• Do not use the following keys for learning: Device

Keys, SETUP, Record (•), Tune-In Keys.

• Learning capacity is approximately 16 to 25 keys,

depending on the code being learned.

• Certain device functions are not learnable including

multi-frequency types, some high frequency ones,

and other unusual formats.

• For optimum learning, avoid high levels of ambient

light such as natural sunlight or energy-efficient

fluorescent lights.

NOTE: Please have your original remote controls

handy before programming learning.

Programming a Learned Key

NOTE: If more than 15 seconds pass between key

presses, the remote exits programming.

3. Place the Atlas Shaw DVR/PVR 5-Device

Universal Remote Control head-to-head

(about 2" apart) from your original remote

control. Also locate the key (on your original

remote control) that you want the Atlas Shaw

DVR/PVR 5-Device Universal Remote Control

to learn.

4. On the original remote, press and hold the key

to be learned. The Atlas Shaw DVR/PVR 5-

Device Universal Remote Control’s LED will

1. Press SETUP until the last-selected device key

blinks twice, then press 9 7 5.

NOTE: If the LED displays one long flash instead,

either your batteries are low, or the Atlas Shaw

DVR/PVR 5-Device Universal Remote Control

has a memory fault. In either case, the remote

will not learn a new key. See “Additional Infor-

mation” on page 23.

2. Press a device key once (i.e., AUX, DVD, AUD,

TV, or CBL) to assign a mode for learning, then

the key that will learn the new code.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 69 70

Sin comentarios

Universal Remote Control Atlas M1055 Manual de usuario Pagina 13