Universal Remote Control ONE FOR ALL URC 4021 Manual de usuario descargar pdf (Pagina 10)

PROGRAMMING A MASTER POWER MACRO

(continued)

Clearing The Master Power Macro

1. Press and hold SET until the LED (red light) blinks twice,

then release

SET.

2. Enter 9 - 9 - 5.The LED will blink twice. Then press POWER

once.

3. Press and hold

SET until the LED blinks twice, then release

SET.The Master Power Macro is now cleared.

RE-ASSIGNING DEVICE KEYS

The One For All 4 Device Universal Remote Control can be set to control a

second PVR,VCR, or DVD player. For example,to control a TV, a cable box,

and

two DVD players, re-assign the unused VCR/PVR key to operate the second

DVD player as follows:

1. On the remote control, press and hold SET until the LED

(red light) blinks twice, then release SET.

2. Enter

9 - 9 - 2.The LED will blink twice.

3. Press

DVD once.

4. Press

VCR/PVR once. The LED will blink twice. The VCR/PVR

key is now ready to be set up to control your second DVD

player. See

Programming Device Control on page 8.

To re-assign a second VCR or PVR (or DVR) to the unused

DVD key, repeat

steps 1 through 4. However,in step 3 substitute VCR/PVR for DVD,and in step 4

substitute

DVD for VCR/PVR.Now the DVD key will be ready to be set up as your

second VCR or PVR (or DVR). See Programming Device Control on page 8.

NOTE: Only one device can be assigned to an unused device key at a time.

USING CHANNEL SCAN

In the CBL/SAT or TV mode, use the FAV key to start a 3-second scan of all

channels. Or, if programmed, use the FAV key to scan only your favorite

channels to view a desired channel (see Programming Favorite Channel Scan

on next page. )

1. Press

CBL/SAT or TV once.

CTGAE4P 4021 manual booklet 5/24/04 12:10 PM Page 11

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Comentarios a estos manuales

Sin comentarios

Universal Remote Control ONE FOR ALL URC 4021 Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Universal Remote Control ONE FOR ALL URC 4021