
W R S _ System Guide 04/2006
16
W R S C O M P O N E N T S
Wireless Extension Unit 1 (WEU-1)
Wired Handgrip Attachment 1 (WHA-1)
Wireless Extension Unit 1 (WEU-1)
With this unit it is possible to connect the hand controllers to a Wireless Main Unit with a
cable. It consists of the Wireless Main Attachment WMA-1, which mounts on the WMU,
and the Wired Handgrip Attachment WHA-1, which accepts the hand controllers. Cable
WC-E1 connects WMA-1 and WHA-1. The Wired Handgrip Attachment 1 can be used
separately to connect the WRC-1 with cable WC-W1 to all models of ARRIFLEX 416
Plus, 235, 435, 535 or 16 SR 3.
Compatibility: When the WHA-1 is used to connect the WRC-1 to the CCU port of a 435
Xtreme, fast ramps and the minimum speed of 0.1fps are not accessible. The WHA-2 must
be connected to the LCS port to access these features.
K2.52056.0 Wireless Extension Unit 1
Wired Handgrip Attachment 1 (WHA-1)
This handgrip attachment can be used to connect the Wireless Remote Control (WRC1)
with cable WC-W1 to all models of ARRIFLEX 416 Plus, 235, 435, 535 or 16 SR 3.
Compatibility: When the WHA-1 is used to connect the WRC-1 to the CCU port of a 435
Xtreme, fast ramps and the minimum speed of 0.1fps are not accessible. The WHA-2 must
be connected to the LCS port to access these features.
K2.52070.0 Wired Handgrip Attachment 1
Wired Handgrip Attachment 2 (WHA-2)
With this handgrip attachment the hand controllers WFU-1, WFU-3 and/or WZU-1,
WZU-3 or the Wireless Remote Control (WRC-1) can be operated hardwired.
Compatibility: The WHA-2 works with the ARRICAM Studio, the ARRICAM Lite, the
ARRIFLEX 416 Plus and 435 Xtreme. It can be connected to the LCS socket of an ARRI-
CAM Lens Data Box, 416 Plus, 435 Xtreme or to a UMC-3 with cable LC-M1, LC-M2,
LC-Z1 or LC-Z2. Alternatively it can be connected to the CAC connector of Studio or
Lite using cable KC-70 (3m/9ft). For lens control on an ARRICAM, a Lens Data Box must
be present. The Lens Data Display for Focus Puller (LDD-FP) cannot be attached to the
WHA-2. The WHA-2 can be mounted on the camera with the Rod Bracket or with the
Rosette Bracket.
K2.54079.0 Wired Handgrip Attachment 2
Wired Handgrip Attachment 2 (WHA-2)
Comentarios a estos manuales