Home Automation Products
K
7
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
DECORA
®
HOME CONTROLS(DHC)
Residential Grade Controllers—Red Line
SPECIFICATIONS AND FEATURES
• Programmer adds user-devised scheduling to DHC
automated control of lights and appliances for
greater convenience, energy savings and security
• Programmer and Controllers send DHC switching
commands over existing 60Hz 120V AC house
wiring.
• Dry Contact Transmitters link signaling from
photocells, infrared sensors, security systems,
motion sensors, and other dry contact transmitters
to DHC controlled devices
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
COLOR
Colors available as indicated. Cat. No. 6312 available
in Ivory (-I), White (-W) and Almond (-A).
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Note: A Cat. No. HCA02-10E System Amplifier must
be installed in all panels in every DHC installation
to ensure adequate signal strength.
Programmer/Controller Products UR
DESCRIPTION CAT. NO.
Basic Wall Mounted Programmer—A powerful home automation controller that is easy to
install and use. Compact, low-profile unit fits in single-gang wallbox. Accepts up to four
addresses; maximum two ON and two OFF commands per address. SECURITY mode ran-
domly selects ON and OFF times to make an empty home appear occupied. ALL LIGHTS
ON switch acts as a panic-button lighting system, switching on all DHC switch modules with
one touch. DIM/BRIGHTEN command can automatically adjust lighting levels of all fixtures
controlled by DHC dimming receivers. LED readout shows time and program status; battery
back-up protects clock setting and program status for ten hours during power interruption.
Available in Ivory, White, and Almond.
Table Top Controller
#
—Provides manual remote control for all 256 DHC addresses. Command
functions include ON/OFF, ALL LIGHTS ON/ALL OFF and DIM/BRIGHTEN. The 6320 plugs
into any 120 volt AC receptacle to transmit command signals over existing AC wiring.
Dry Contact Controllers
#
—Allow monitoring of up to four dry contact closures. No. 6315
Maintained Contact Transmitter sends ON or OFF command signals in response to contact
opening or closure. No. 6316 Momentary Contact Transmitter sends ON or OFF command
signals in response to contact closure, and no command signal upon contact openings.
These units can be used with photocells, infrared sensors, security system, motion sensors,
and any other dry-contact-based sensors. Installs in a single-gang wallbox. Color: Ivory.
Power to control side: 125V 60Hz AC Only.
LV LEAD COLOR TRANSMITS TO
Blue A1*
Orange A2*
Yellow A3*
Brown A4*
*Or any four sequential address codes within the same Letter Code group
as the Transmitter.
CSA Certified except where indicated by
#
6312
6320
6315
6316
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales