Universal Remote Control STAR LIGHT Manual de usuario descargar pdf (Pagina 4)

Star Bright

Remote Controller User Manual

3 /11

DOCUMENT# E-M-0039-01 Date: August 10, 2011

Address Setup

How to assign the address

Address assignment is used to prevent multiple devices from reacting simultaneously to a remote

controller signal.

Please follow the steps below to setup the address:

1. Connect all power cords between Star Bright and the AC adaptor.

2. Plug in the power adaptor at the wall to apply power to Star Bright.

3. Wait for 2 seconds.

4. Press ESC when “ADDRESS: None” message is displayed.

5. Input 2 characters from 00 to 99 and AA to ZZ or press DEL for no

address.

6. Press ESC to exit.

How to synchronize Star Bright and the remote controller

Star Bright and the remote controller need to be synchronized when an address is assigned. If the

address is unknown, please see the second instruction below.

Please follow the steps below to synchronize the two components:

1. Press ESC while Star Bright is powered on.

2. Press the known 2 character address following the ESC button.

If the address is unknown, please follow the steps below:

1. Unplug the USB cord from Star Bright and the power cord at the

wall then wait for 5 seconds if initially connected.

2. Plug in the power cord of Star Bright at the wall.

3. Wait for 2 seconds.

4. Star Bright will display the assigned address.

5. Proceed to Step 1 of “synchronize the two components” above.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Universal Remote Control STAR LIGHT Manual de usuario Pagina 4