
Star Bright
Remote Controller User Manual
DOCUMENT# E-M-0039-01 Date: August 10, 2011
COMMAND TABLE
Set to operate in vertical mode 1 where the cable is at the bottom.
Set to operate in vertical mode 2 where the cable is at the top.
Clear the display. Fills all the characters with Spaces.
Set to fast action speed. All scroll actions will operate at twice the slow
mode speed.
Set to slow (Normal) action speed.
Set to scroll left as the action type. Text will appear at the right and move
left.
Set to scroll right as the action type. Text will appear on the left and move
right.
Set to scroll right as the action type. The text on the line will move down.
Set to scroll up as the action type. The text on the line will move up.
Set to instant write as the action type. Text will over write from left to right.
Set to Pixelate/Random as the action type. The text appears in random dots
over 1 second.
Blink the current display 5 times. Put BB for 10 seconds.
Scroll remaining data off the screen in the direction specified by L, R, U or
D.
Hold for 1 second. Ex: Put HH for 2 seconds for HHH for 3 seconds.
Marks the end of the current message sequence, which then starts again.
Example 1:
Action details
1. Screen clears.
2. The message “HELLO WORLD” appears and holds for a second.
3. The message “HELLO WORLD” scrolls left as the message “BYE” enters to the screen scrolling
left.
4. The sequence ends by the E command.
Example 2:
Action details
1. Set to operate in fast action speed.
Only the scroll speed will be doubled relative to the normal scroll speed and not hold time.
2. Follow step1 to 4 of the example 1.
Example 3:
Action details
1. Set to operate in vertical mode 1.
Follows step 1 to 4 of the example 1.
Comentarios a estos manuales