Universal Remote Control MX-5000 Guía de usuario descargar pdf (Pagina 32)

11 The Download window appears. Download the file to the MX-5000 and test the IR codes, line of

sight, before moving on to RF Setup. Connect the larger end of the provided USB cable to your PC

and connect the smaller end to the MX-5000 remote control. This requires you to open the side

panel door on the left side of the MX-5000 Remote Control.

A progress window pops up and displays the download process until it is complete.

Downloading and Testing

In most home theater systems, you will find that some codes have to be learned. You may have a

brand new component, whose codes are not yet in the Universal Database, or you may have most of

the codes for a component, but a few are missing. To find out what you’ll need to learn, you must

rigorously test all of the codes you have programmed using the IR Database and correctly label the

buttons that have to be learned. Of course you can simply test a button and if it doesn’t work, go into

the learn mode, test the command, relearn as necessary and so on. However, this wastes time. The

best approach is to download, test all the commands, make a list, then use CCP to modify labels, and

delete unnecessary codes.

Downloading to TEST Pre-Programmed IR Commands From The Database

You can choose “Download” from the Program Menu or you can click on the “Communications” tab button

on the main toolbar and select “Send to Remote”. The “Download” window appears unless you haven’t saved

the file. If you haven’t saved the file, you will be prompted to do so.

Preparing the List of Buttons to be Learned

1. Test ALL Buttons

Begin testing the codes you downloaded to the MX-5000 Remote Control. Make sure that you test

all buttons (hard buttons and the LCD buttons on each page of every device). Don’t try to learn new

commands yet, wait until you can do all of them at once, systematically.

2. Make a List of all buttons that don’t work.

3. Compare the original remote control to the button layouts you’ve created. Rename any buttons

from missing functions that need to be learned to the List.

Type in Section Title

Downloading and Testing Pre-Programmed IR Codes

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 90 91

Sin comentarios

Universal Remote Control MX-5000 Guía de usuario Pagina 32