Universal Remote Control MX-5000 Guía de usuario descargar pdf (Pagina 52)

Type in Section Title

After editing Page/Button layouts for all devices, it’s time to learn any IR codes required for the

remote.

Learning Tips

Fresh Batteries in the Original Remote Control - Weak batteries will cause CCP to fail to correctly

learn. Note that EVEN if the original remote still operates the component, the batteries can be too

weak to produce a strong enough carrier for any learning remote control to detect!!!! When a code

fails, replace the batteries FIRST!

Tap instead of Pressing and Holding - With some codes, this will produce better results. Normally, you

should press and hold.

The “Flutter” Technique - If you are having problems with a Code that has to be sustained (like volume

up or down), sometimes fluttering the button (Tapping the button repeatedly, very fast while learning)

will reduce errors.

The “Semaphore” Technique - Use a book or another opaque object in between the two remotes.

Press the button on the original remote, then remove the obstruction for a moment, then put it back.

Experiment with different timings.

Learning IR Codes One at a Time

1 Select the Button - Click on the button that you want to learn an IR command.

2 Click on the Learn Icon Button in the Program Menu - The Learn IR window opens.

IR Learning

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 90 91

Sin comentarios

Universal Remote Control MX-5000 Guía de usuario Pagina 52