Universal Remote Control RNC-200 Manual de usuario

Busca en linea o descarga Manual de usuario para Redes Universal Remote Control RNC-200. Testing the Ericsson Node B Typ RBS 3202 with Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
All rights reserved 1CMP/Gr 09/2004 – 1CM56_E Version 1.0
Products: R&S CMU300, NetHawk RNC/Iub Simulator
Testing the Ericsson
®
Node B Typ RBS 3202
®
with
R&S
®
CMU300
®
BTS Radio Communication Tester
and
NetHawk
®
RNC/I
ub
Simulator
®
Testing the RF parameters of a WCDMA base station during the network rollout phase ensures
subsequent trouble-free operation of networks as a basic prerequisite for general UMTS customer
acceptance. This document describes a complete solution for testing the main transmission and reception
parameters according to Specification 3GPP TS 25.141 FDD R99 on the basis of the R&S CMU300 Radio
Communication Tester (RF measurements) and the NetHawk RNC/Iub Simulator (base station controller).
The solution presented here is particularly recommended for installation measurements and regression
tests on new UMTS system components.
Vista de pagina 0
1 2 3 4 5 6 ... 15 16

Indice de contenidos

Pagina 1

All rights reserved – 1CMP/Gr 09/2004 – 1CM56_E Version 1.0 Products: R&S CMU300, NetHawk RNC/Iub Simulator Testing the Ericsson® Node B Ty

Pagina 2 - Table of Contents

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 10 Rohde & Schwarz • Carry out modulation analysis. The RMS values of the error vector ma

Pagina 3 - 2 Operating Principle

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 11 Rohde & Schwarz • To select the CDP measurement unit use softkeys Code Dom. Power / Uni

Pagina 4 - 87654321

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 12 Rohde & Schwarz • Set the starting output level to –70 dBm (Generator Level / Total T

Pagina 5 - 4 Test Setup

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 13 Rohde & Schwarz Storing the measurement results You can use the R&S CMU300 to save m

Pagina 6 - 5 Test Sequence

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 14 Rohde & Schwarz 7 References [1] 3GPP TS 25.141 Technical Specification, 3rd Generatio

Pagina 7

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 15 Rohde & Schwarz 9 Additional Information The solution presented here corresponds to the

Pagina 8 - Transmitter measurements

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 16 Rohde & Schwarz Amendment History Version Filename Editor Comments 1.0 1CM56_E R&a

Pagina 9

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 2 Rohde & Schwarz Table of Contents 1 Overview ...

Pagina 10

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 3 Rohde & Schwarz 2 Operating Principle RF TesterR&S CMU300Node BEricsson RBS3202NetHa

Pagina 11 - Receiver test

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 4 Rohde & Schwarz 3 Hardware and Software Requirements Configuration of measurement compon

Pagina 12

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 5 Rohde & Schwarz 4 Test Setup Please create the test setup according to the following blo

Pagina 13 - Sequence

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 6 Rohde & Schwarz 5 Test Sequence The following description of the test sequence assumes b

Pagina 14 - 8 Abbreviations

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 7 Rohde & Schwarz Activation of the RF power can be monitored with the aid of the spectrum

Pagina 15 - 10 Ordering Information

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 8 Rohde & Schwarz Transmitter measurements R&S CMU300: • Start the function group 3G U

Pagina 16

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 9 Rohde & Schwarz • softkey Analyzer Settings: Set the DL frequency or channel number to

Comentarios a estos manuales

Sin comentarios